[MonoDevelop] attempting git source compile of monodevelop (master)
Ian Norton
ian.norton-badrul at thales-esecurity.com
Wed Jan 2 14:14:52 UTC 2013
Quite possibly your pkg-config files from the system's mono have got confused
with those of your build. That and you will probably have a mixed up GAC now
containing things from fedora and your build.
You'll perhaps need to setup a parallel mono or remove the FC 17 mono.
You can do this following
http://www.mono-project.com/Parallel_Mono_Environments
Ian
On Wed, Jan 02, 2013 at 01:23:18PM +0000, Jeremy Reeve wrote:
> Hi there,
>
> I'm trying to compile monodevelop (master) on my Fedora 17 system. I
> would like to try out the F# support and from what I can gather, that is
> best done with mono/monodevelop 3+
>
> I've compiled the entire mono stack locally which consists of:
>
> mono (master)
> fsharp (master)
> gtk-sharp (gtk-sharp-2-12-branch) <== not sure this is correct...
> gnome-sharp (master)
> monodevelop (master)
>
> Configuring gnome-sharp:
>
> [jsr at hermes gnome-sharp]$ ./bootstrap-2.24 --prefix=/home/jsr/local
> + sed -e s/@GNOME_SHARP_VERSION@/2.24.2/ -e
> s/@GTK_REQUIRED_VERSION@/2.13.0/ -e
> s/@GTK_SHARP_REQUIRED_VERSION@/2.12.2/ -e
> s/@GNOME_REQUIRED_VERSION@/2.23.0/ -e
> s/@GNOMECANVAS_REQUIRED_VERSION@/2.20.0/ -e
> 's/@VERSIONCSDEFINES@/-define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8
> -define:GNOME_SHARP_2_16 -define:GNOME_SHARP_2_20
> -define:GNOME_SHARP_2_24/' -e 's/@VERSIONCFLAGS@/-DGTK_SHARP_2_6
> -DGTK_SHARP_2_8 -DGNOME_SHARP_2_16 -DGNOME_SHARP_2_20
> -DGNOME_SHARP_2_24/' -e 's/@POLICY_VERSIONS@/2.4 2.6 2.8 2.16 2.20/' -e
> s/@ASSEMBLY_VERSION@/2.24.0.0/ ./configure.in.in
> Running libtoolize...
> libtoolize: putting auxiliary files in `.'.
> libtoolize: copying file `./ltmain.sh'
> libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in
> and
> libtoolize: rerunning libtoolize, to keep the correct libtool macros
> in-tree.
> libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
> Running aclocal ...
> Running autoheader...
> Running automake --foreign ...
> Running autoconf ...
> Running ./configure --enable-maintainer-mode --enable-compile-warnings
> --prefix=/home/jsr/local ...
> configure: WARNING: unrecognized options: --enable-compile-warnings
> checking build system type... x86_64-unknown-linux-gnu
> checking host system type... x86_64-unknown-linux-gnu
> checking target system type... x86_64-unknown-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking whether to enable maintainer-specific portions of Makefiles...
> yes
> checking for gcc... gcc
> checking for gcc... (cached) gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking for gcc... (cached) gcc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to accept ISO C89... (cached) none needed
> checking dependency style of gcc... (cached) gcc3
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for ANSI C header files... yes
> checking how to print strings... printf
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for fgrep... /usr/bin/grep -F
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 1572864
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... yes
> checking how to convert x86_64-unknown-linux-gnu file names to
> x86_64-unknown-linux-gnu format... func_convert_file_noop
> checking how to convert x86_64-unknown-linux-gnu file names to toolchain
> format... func_convert_file_noop
> checking for /usr/bin/ld option to reload object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for dlltool... dlltool
> checking how to associate runtime and link libraries... printf %s\n
> checking for ar... ar
> checking for archiver @FILE support... @
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for sysroot... no
> checking for mt... no
> checking if : is a manifest tool... no
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... no
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports
> shared libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking size of void *... 8
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for MONO_DEPENDENCY... yes
> checking for gacutil... /home/jsr/local/bin/gacutil
> checking for al... /home/jsr/local/bin/al
> checking for mono... /home/jsr/local/bin/mono
> checking for mcs... /home/jsr/local/bin/mcs
> checking for MONO_CAIRO... yes
> checking for GTKSHARP... yes
> checking for GLADESHARP... yes
> checking for GAPI... yes
> checking for gapi2-parser... /home/jsr/local/bin/gapi2-parser
> checking for gapi2-codegen... /home/jsr/local/bin/gapi2-codegen
> checking for gapi2-fixup... /home/jsr/local/bin/gapi2-fixup
> checking for LIBART... yes
> checking for GNOMEVFS... yes
> checking for GNOME... yes
> configure: creating ./config.status
> config.status: creating AssemblyInfo.cs
> config.status: creating Makefile
> config.status: creating policy.config
> config.status: creating sources/Makefile
> config.status: creating art/Makefile
> config.status: creating art/art-sharp.dll.config
> config.status: creating art/art-sharp-2.0.pc
> config.status: creating gnome/Makefile
> config.status: creating gnome/gnome-sharp.dll.config
> config.status: creating gnome/gnome-sharp-2.0.pc
> config.status: creating gnome/glue/Makefile
> config.status: creating gnomevfs/Makefile
> config.status: creating gnomevfs/gnome-vfs-sharp.dll.config
> config.status: creating gnomevfs/gnome-vfs-sharp-2.0.pc
> config.status: creating gconf/Makefile
> config.status: creating gconf/doc/Makefile
> config.status: creating gconf/GConf/Makefile
> config.status: creating gconf/GConf/gconf-sharp.dll.config
> config.status: creating gconf/GConf/gconf-sharp-2.0.pc
> config.status: creating gconf/GConf.PropertyEditors/Makefile
> config.status: creating
> gconf/GConf.PropertyEditors/gconf-sharp-peditors-2.0.pc
> config.status: creating gconf/tools/Makefile
> config.status: creating gconf/tools/gconfsharp2-schemagen
> config.status: creating sample/Makefile
> config.status: creating sample/gconf/Makefile
> config.status: creating sample/gnomevfs/Makefile
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
> config.status: executing libtool commands
> configure: WARNING: unrecognized options: --enable-compile-warnings
> ---
> Configuration summary
>
> * Installation prefix = /home/jsr/local
> * C# compiler: /home/jsr/local/bin/mcs -debug -define:GTK_SHARP_2_6
> -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 -define:GNOME_SHARP_2_20
> -define:GNOME_SHARP_2_24
>
> Optional assemblies included in the build:
>
> * art-sharp.dll: yes
> * gnomevfs-sharp.dll: yes
> * gnome-sharp.dll: yes
>
> NOTE: if any of the above say 'no' you may install the
> corresponding development packages for them, rerun
> autogen.sh to include them in the build.
>
> gnome-sharp.dll requires libgnomecanvas, libgnome,
> and libgnomeui.
> ---
> Now type `make' to compile
> [jsr at hermes gnome-sharp]$
>
>
> My gnome-sharp build fails with the following:
>
> [jsr at hermes gnome-sharp]$ make
> make all-recursive
> make[1]: Entering directory `/home/jsr/dev/gnome-sharp'
> Making all in sources
> make[2]: Entering directory `/home/jsr/dev/gnome-sharp/sources'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/home/jsr/dev/gnome-sharp/sources'
> Making all in art
> make[2]: Entering directory `/home/jsr/dev/gnome-sharp/art'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/home/jsr/dev/gnome-sharp/art'
> Making all in gnomevfs
> make[2]: Entering directory `/home/jsr/dev/gnome-sharp/gnomevfs'
> Making all in .
> make[3]: Entering directory `/home/jsr/dev/gnome-sharp/gnomevfs'
> make[3]: Nothing to be done for `all-am'.
> make[3]: Leaving directory `/home/jsr/dev/gnome-sharp/gnomevfs'
> make[2]: Leaving directory `/home/jsr/dev/gnome-sharp/gnomevfs'
> Making all in gnome
> make[2]: Entering directory `/home/jsr/dev/gnome-sharp/gnome'
> Making all in .
> make[3]: Entering directory `/home/jsr/dev/gnome-sharp/gnome'
> /home/jsr/local/bin/mcs -debug -define:GTK_SHARP_2_6
> -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 -define:GNOME_SHARP_2_20
> -define:GNOME_SHARP_2_24 -nowarn:0169,0612,0618 -unsafe
> -out:gnome-sharp.dll -target:library
> -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/pango-sharp.dll -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/atk-sharp.dll -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gdk-sharp.dll -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gtk-sharp.dll -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/glib-sharp.dll /r:../art/art-sharp.dll /r:../gnomevfs/gnome-vfs-sharp.dll -r:/home/jsr/local/lib/pkgconfig/../../lib/mono/2.0/Mono.Cairo.dll generated/*.cs ./BonoboUIVerb.cs ./IconTheme.cs ./Modules.cs AssemblyInfo.cs
> AssemblyInfo.cs(6,11): warning CS1699: Use compiler option `keyfile' or
> appropriate project settings instead of `AssemblyKeyFile' attribute
> generated/App.cs(41,17): warning CS0108: `Gnome.App.Name' hides
> inherited member `Gtk.Widget.Name'. Use the new keyword if hiding was
> intended
> /home/jsr/local/lib/pkgconfig/../../lib/mono/gtk-sharp-2.0/gtk-sharp.dll
> (Location of the symbol related to previous warning)
> generated/ThemeFile.cs(41,26): warning CS0809: Obsolete member
> `Gnome.ThemeFile.ToString()' overrides non-obsolete member
> `object.ToString()'
> /home/jsr/local/lib/mono/4.5/mscorlib.dll (Location of the symbol
> related to previous warning)
> generated/CanvasShape.cs(200,41): error CS0030: Cannot convert type
> `GLib.Value' to `Art.VpathDash'
> Compilation failed: 1 error(s), 3 warnings
> make[3]: *** [gnome-sharp.dll] Error 1
> make[3]: Leaving directory `/home/jsr/dev/gnome-sharp/gnome'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/jsr/dev/gnome-sharp/gnome'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/jsr/dev/gnome-sharp'
> make: *** [all] Error 2
> [jsr at hermes gnome-sharp]$
>
>
> If I've left out any information helpful to resolution of the problem,
> I'd be more than happy to provide it.
>
> I'm not even certain I should be able to compile the various
> gtk-sharp/gnome-sharp sources against my gnome system library versions.
>
> Perhaps I haven't looked properly but I can't seem to find any more
> dependency information other than that implied by the build system.
>
> Any help appreciated.
>
> Regards...Jeremy
>
>
>
>
> _______________________________________________
> Monodevelop-list mailing list
> Monodevelop-list at lists.ximian.com
> http://lists.ximian.com/mailman/listinfo/monodevelop-list
More information about the Monodevelop-list
mailing list