[Mono-dev] Problem with mcs build

Marek Safar marek.safar at gmail.com
Wed Oct 19 13:53:23 UTC 2016


Hi,

How did you install monolite? It looks like it's out of sync to your
runtime.

Marek

On Tue, Oct 18, 2016 at 9:58 PM, Cyd Haselton <chaselton at gmail.com> wrote:

> Just in case, I ran 'make clean' and redid the build.
> Link to build log: http://pastebin.com/TBSUNH4x
>
> On Oct 18, 2016 2:20 PM, "Cyd Haselton" <chaselton at gmail.com> wrote:
>
>> From previous conversation:
>>
>> On Oct 18, 2016 9:08 AM, "Marek Safar" <marek.safar at gmail.com> wrote:
>>
>> Yes, please
>>
>> On Tue, Oct 18, 2016 at 3:53 PM, Cyd Haselton <chaselton
>> <chaselton at gmail.com>@gmail.com <chaselton at gmail.com>>wrote:
>>
>> I've already posted full build logs from root source folder.  Do you want
>> me to also cd to mono, run make and post build logs from that?
>>
>> I posted full build logs about four replies back; here are the links:
>>
>> autogen.sh:http://pastebin.com/P4LcBWpZ
>> make: http://pastebin.com/JvdhWhCC
>>
>> On Oct 18, 2016 1:23 PM, "Marek Safar" <marek.safar at gmail.com> wrote:
>>
>>> I asked for "full mono build" not for build of mono subfolder
>>>
>>> On Tue, Oct 18, 2016 at 6:17 PM, Cyd Haselton <chaselton at gmail.com>
>>> wrote:
>>>
>>>> That's it. You asked me to build in the mono directory…that's the
>>>> result.
>>>> When I go back and build in the root source directory it fails with the
>>>> same error as you saw in the full build log
>>>>
>>>> On Oct 18, 2016 10:38 AM, "Marek Safar" <marek.safar at gmail.com> wrote:
>>>>
>>>>> and then it stopped or where is the rest of the build output?
>>>>>
>>>>> On Tue, Oct 18, 2016 at 5:29 PM, Cyd Haselton <chaselton at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Build in mono dir completed successfully
>>>>>>
>>>>>> Link to logs: http://pastebin.com/2YwrnFCe
>>>>>>
>>>>>> On Oct 18, 2016 10:05 AM, "Cyd Haselton" <chaselton at gmail.com> wrote:
>>>>>>
>>>>>>> That's just it; it doesn't fail.  I'll post the pastebin links when
>>>>>>> I have them.
>>>>>>>
>>>>>>> On Oct 18, 2016 10:02 AM, "Marek Safar" <marek.safar at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I'd like to see full mono build wherever it fails, just gist that.
>>>>>>>>
>>>>>>>> On Tue, Oct 18, 2016 at 4:53 PM, Cyd Haselton <chaselton at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> The build fails at the end because of a dependency on libeglib, so
>>>>>>>>> I have to cd to eglib and build there as well. Do you want logs from that
>>>>>>>>> build too?
>>>>>>>>>
>>>>>>>>> On Oct 18, 2016 9:08 AM, "Marek Safar" <marek.safar at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Yes, please
>>>>>>>>>>
>>>>>>>>>> On Tue, Oct 18, 2016 at 3:53 PM, Cyd Haselton <
>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> I've already posted full build logs from root source folder.  Do
>>>>>>>>>>> you want me to also cd to mono, run make and post build logs from that?
>>>>>>>>>>>
>>>>>>>>>>> On Oct 18, 2016 8:30 AM, "Marek Safar" <marek.safar at gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> You should not be using make within mcs/mcs if you haven't
>>>>>>>>>>>> compiled mono successfully before that. Start from scratch and paste full
>>>>>>>>>>>> log when building from root mono folder.
>>>>>>>>>>>>
>>>>>>>>>>>> On Tue, Oct 18, 2016 at 3:20 PM, Cyd Haselton <
>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks Marek,
>>>>>>>>>>>>> Any input on the logs?
>>>>>>>>>>>>>
>>>>>>>>>>>>> In the meantime I've deleted the build tree and re-downloaded
>>>>>>>>>>>>> the sources so that I can start over from scratch.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Don't know if this is relevant but I have noticed that the
>>>>>>>>>>>>> Makefiles and various other scripts do not pick up the CONFIG_SHELL and
>>>>>>>>>>>>> SHELL vars that I specify when running the top-level configure and/or
>>>>>>>>>>>>> autogen.sh.  Instead they default to /bin/sh, which will definitely error
>>>>>>>>>>>>> out on my platform.  I've patched as many of the offending files I've found.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Oct 18, 2016 7:54 AM, "Marek Safar" <marek.safar at gmail.com>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> No, bootstrap process is not deprecated and it's still
>>>>>>>>>>>>>> actively used especially when system mono is unavailable or too old.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Marek
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tue, Oct 18, 2016 at 12:23 PM, Cyd Haselton <
>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Ping for any input on pastebin logs (see previous emails)
>>>>>>>>>>>>>>> and if bootstrapping mcs was/is/will be deprecated.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Oct 16, 2016 2:28 PM, "Cyd Haselton" <chaselton at gmail.com>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Still troubleshooting, though I'm running out of ideas.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Is it possible bootstrapping mcs was deprecated?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Oct 15, 2016 6:52 PM, "Cyd Haselton" <
>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I blew away the build directory, downloaded the 10/13
>>>>>>>>>>>>>>>>> tarball from mono/sources (http://download.mono-project.
>>>>>>>>>>>>>>>>> com/sources/mono/nightly/) and started over from
>>>>>>>>>>>>>>>>> scratch.  I got the same error that you can see in the pastebin log;
>>>>>>>>>>>>>>>>> something in the build is expecting mscorlib.dll to be installed at
>>>>>>>>>>>>>>>>> usr/lib/mono/4.5.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Just for kicks I created the usr/lib/mono/4.5 directory
>>>>>>>>>>>>>>>>> and softlinked mscorlib.dll to that location. The build progresses, then
>>>>>>>>>>>>>>>>> fails with the dreaded Mono.CSharp.InternalErrorException
>>>>>>>>>>>>>>>>> error.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> After that error I navigated to mcs/mcs, ran make and got
>>>>>>>>>>>>>>>>> an error that the build 'cannot find ./../mcs/class/lib/mcs.exe.'  Which is
>>>>>>>>>>>>>>>>> odd because the build shouldn't be using mcs.exe; it isn't installed on my
>>>>>>>>>>>>>>>>> system.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Pastebin of mcs/mcs make errors here:
>>>>>>>>>>>>>>>>> http://pastebin.com/mxBLYmnH
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>> Cyd
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Oct 15, 2016 2:42 PM, "Cyd Haselton" <
>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I can't ignore the error as it stops the build completely.
>>>>>>>>>>>>>>>>>> Key note: I do not have a working mcs; I'm using the
>>>>>>>>>>>>>>>>>> monolite bootstrap method. In this case, mscorlib.dll…along with other
>>>>>>>>>>>>>>>>>> files…IS located at mcs/class/lib/monolite
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Here are the requested logs:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> autogen.sh: http://pastebin.com/P4LcBWpZ
>>>>>>>>>>>>>>>>>> make: http://pastebin.com/JvdhWhCC
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Additionally, here's a pastebin of the list of files in
>>>>>>>>>>>>>>>>>> the ./mcs/class/lib/monolite directory:
>>>>>>>>>>>>>>>>>> http://pastebin.com/ZcLLwWHz
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>> Cyd
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Oct 14, 2016 6:17 PM, "Alexander Köplinger" <
>>>>>>>>>>>>>>>>>> alkpli at microsoft.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> That is just the default message that is compiled into
>>>>>>>>>>>>>>>>>>> the runtime, you can ignore it. The MONO_PATH env variable controls where
>>>>>>>>>>>>>>>>>>> Mono tries to locate the framework assemblies in this case.
>>>>>>>>>>>>>>>>>>> It is weird though that this is set to
>>>>>>>>>>>>>>>>>>> /class/lib/monolite, no wonder it can’t find mscorlib.dll there.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Can you please share the full build log including
>>>>>>>>>>>>>>>>>>> autogen.sh/configure invocations and so on in a gist or
>>>>>>>>>>>>>>>>>>> pastebin?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>> Alex
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 15 Oct 2016, at 01:07, Cyd Haselton <
>>>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> So I scrapped everything and downloaded a newer snapshot
>>>>>>>>>>>>>>>>>>> from the mono/sources site.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> This time I can't seem to bootstrap the mcs build; the
>>>>>>>>>>>>>>>>>>> runtime appears to be hardcoded to check for the mscorlib.dll file in
>>>>>>>>>>>>>>>>>>> $PREFIX/lib/mono/4.5 instead of in the monolite directory.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> make[2]: Leaving directory '/data/data/com.termux/files/p
>>>>>>>>>>>>>>>>>>> kg/ps/mono-4.9.0/data'             Making all in
>>>>>>>>>>>>>>>>>>> runtime
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> make[2]: Entering directory '/data/data/com.termux/files/p
>>>>>>>>>>>>>>>>>>> kg/ps/mono-4.9.0/runtime'         if test -w
>>>>>>>>>>>>>>>>>>> /data/data/com.termux/files/pkg/ps/mono-4.9.0/mcs; then
>>>>>>>>>>>>>>>>>>> :; else chmod -R +w /data/data/com.termux/files/pkg/ps/mono-4.9.0/mcs;
>>>>>>>>>>>>>>>>>>> fi                                            cd
>>>>>>>>>>>>>>>>>>> /data/data/com.termux/files/pkg/ps/mono-4.9.0/mcs &&
>>>>>>>>>>>>>>>>>>> make --no-print-directory -s NO_DIR_CHECK=1 PROFILES='binary_reference_assemblies
>>>>>>>>>>>>>>>>>>> net_4_x xbuild_12 xbuild_14      ' CC='gcc -fPIC -fPIE'
>>>>>>>>>>>>>>>>>>> all-profiles
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> MONO_PATH=/class/lib/monolite: /data/data/com.termux/files/pk
>>>>>>>>>>>>>>>>>>> g/ps/mono-4.9.0/runtime/mono-wrapper
>>>>>>>>>>>>>>>>>>> .//class/lib/monolite/basic.ex
>>>>>>>>>>>>>>>>>>> e
>>>>>>>>>>>>>>>>>>> The assembly mscorlib.dll was not found or could not be
>>>>>>>>>>>>>>>>>>> loaded.                             It should have been
>>>>>>>>>>>>>>>>>>> installed in the `/data/data/com.termux/files/usr/lib/mono/4.5/mscorlib.dll'
>>>>>>>>>>>>>>>>>>> directory.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Any thoughts?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Oct 12, 2016 5:15 PM, "Cyd Haselton" <
>>>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hello Alex,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I'm not building from git-master or git; I am using
>>>>>>>>>>>>>>>>>>>> monolite.  I think I mentioned this earlier…if not, apologies for leaving
>>>>>>>>>>>>>>>>>>>> out important info.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I've gotten past the SIGSEGV I mentioned earlier by
>>>>>>>>>>>>>>>>>>>> editing threads.c (see https://github.com/mono/mono/c
>>>>>>>>>>>>>>>>>>>> ommit/1c9e34cce5e53ec5126d546a3014bc1493425219
>>>>>>>>>>>>>>>>>>>> <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fmono%2Fmono%2Fcommit%2F1c9e34cce5e53ec5126d546a3014bc1493425219&data=01%7C01%7Calkpli%40microsoft.com%7C2c904d06ed0b493c8c2408d3f486d145%7C72f988bf86f141af91ab2d7cd011db47%7C1&sdata=KTOG36Nl3QmmRzsW%2FIQQ17R5b6NBwBw%2FI3BDy170x4c%3D&reserved=0>).
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I've run into a new error that seems to occur in sgen.
>>>>>>>>>>>>>>>>>>>> I'm going to try building without it enabled.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Cyd
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Oct 12, 2016 1:16 PM, "Alexander Köplinger" <
>>>>>>>>>>>>>>>>>>>> alkpli at microsoft.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> If you don’t have a working Mono installed on your
>>>>>>>>>>>>>>>>>>>>> system for bootstrapping then the recommended way is to use monolite if you
>>>>>>>>>>>>>>>>>>>>> build from git master: https://github.com/mon
>>>>>>>>>>>>>>>>>>>>> o/mono#if-you-dont-have-a-working-mono-installation
>>>>>>>>>>>>>>>>>>>>> <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fmono%2Fmono%23if-you-dont-have-a-working-mono-installation&data=01%7C01%7Calkpli%40microsoft.com%7C2c904d06ed0b493c8c2408d3f486d145%7C72f988bf86f141af91ab2d7cd011db47%7C1&sdata=f5%2FGyZF%2BpjvWB2gqMjc%2FcVZgKjaRDU%2BY0grT0HwFAWk%3D&reserved=0>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> - Alex
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On 12 Oct 2016, at 20:02, Cyd Haselton <
>>>>>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hello Ludovic,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Would the missing 'last' field cause the SIGSEGV?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Cyd
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Oct 12, 2016 12:18 PM, "Cyd Haselton" <
>>>>>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>> > Full output of './mono/mini/mono -V' here:
>>>>>>>>>>>>>>>>>>>>> http://pastebin.com/xZw3qhVD
>>>>>>>>>>>>>>>>>>>>> <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpastebin.com%2FxZw3qhVD&data=01%7C01%7Calkpli%40microsoft.com%7C4f1712aba12141771e4008d3f2c9fd2e%7C72f988bf86f141af91ab2d7cd011db47%7C1&sdata=rL8nuhHORHneIWc3OgllqTo2iB7RdN8P5YdOU2jNPpo%3D&reserved=0>
>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>>>>>> > On Oct 12, 2016 12:12 PM, "Cyd Haselton" <
>>>>>>>>>>>>>>>>>>>>> chaselton at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>> >> Since I don't have a working mcs installed, I'm
>>>>>>>>>>>>>>>>>>>>> using the snapshots available from the download site here:
>>>>>>>>>>>>>>>>>>>>> http://download.mono-project.com/sources/mono/
>>>>>>>>>>>>>>>>>>>>> <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdownload.mono-project.com%2Fsources%2Fmono%2F&data=01%7C01%7Calkpli%40microsoft.com%7C4f1712aba12141771e4008d3f2c9fd2e%7C72f988bf86f141af91ab2d7cd011db47%7C1&sdata=T%2BA5GezSev7nlwMowcNsMGaftco014weAy31yrfIRbM%3D&reserved=0>
>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>> >> Here's the output of ./mono/mini/mono -V from my
>>>>>>>>>>>>>>>>>>>>> build tree:
>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>> >> ./mono/mini/mono -V
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> >> Mono JIT compiler version 4.7.0 (Nightly
>>>>>>>>>>>>>>>>>>>>> 4.7.0.593/4e441ec
>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>>>>>>>>> >> On Oct 11, 2016 10:06 AM, "Ludovic Henry" <
>>>>>>>>>>>>>>>>>>>>> luhenry at microsoft.com> wrote:
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>> Hi Cyd,
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>> Which mono commit are you based on? It seems like
>>>>>>>>>>>>>>>>>>>>> the managed System.Threading.InternalThread is
>>>>>>>>>>>>>>>>>>>>> missing the “last” field.
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>> Thank you,
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>> Ludovic
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> Mono-devel-list mailing list
>>>>>>>>>>>>>>>>>>>>> Mono-devel-list at lists.dot.net
>>>>>>>>>>>>>>>>>>>>> https://na01.safelinks.protect
>>>>>>>>>>>>>>>>>>>>> ion.outlook.com/?url=http%3A%2
>>>>>>>>>>>>>>>>>>>>> F%2Flists.dot.net%2Fmailman%2F
>>>>>>>>>>>>>>>>>>>>> listinfo%2Fmono-devel-list&dat
>>>>>>>>>>>>>>>>>>>>> a=01%7C01%7Calkpli%40microsoft
>>>>>>>>>>>>>>>>>>>>> .com%7C4f1712aba12141771e4008d
>>>>>>>>>>>>>>>>>>>>> 3f2c9fd2e%7C72f988bf86f141af91
>>>>>>>>>>>>>>>>>>>>> ab2d7cd011db47%7C1&sdata=b9Lyb
>>>>>>>>>>>>>>>>>>>>> et0SXWu5pvvxt7qTTZx1Azx7BMcrE%2BmpZbnzq0%3D&reserved=0
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Mono-devel-list mailing list
>>>>>>>>>>>>>>> Mono-devel-list at lists.dot.net
>>>>>>>>>>>>>>> http://lists.dot.net/mailman/listinfo/mono-devel-list
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.dot.net/pipermail/mono-devel-list/attachments/20161019/785338bd/attachment-0001.html>


More information about the Mono-devel-list mailing list