[Mono-dev] problem building mono, can't get monolite to work

[pablosantosluac at terra.es]

Hi again,

When I try to run mcs.exe (monolite) this is what I get:

../mono/runtime/mono-wrapper class/lib/monolite/mcs.exe
The assembly mscorlib.dll was not found or could not be loaded.
It should have been installed in the 
`/usr/local/lib/mono/1.0/mscorlib.dll' directory.

I don't know whether it is related to the problem below (not being able 
to compile the simplest c# code at all). Setting LD_LIBRARY_PATH or 
MONO_PATH doesn't help either...

Help?

pablo


pablosantosluac at terra.es escribió:
> Hi Andreas,
>
> I'm afraid I'm not still close.
>
> I got rid of the mcs binary and I tried (after make get-monolite-latest) 
> and then
>
> ./configure --with-prefix=/home/pablo/monobin --with-sigaltstack=no 
> --with-sigaltstack=no; make
>
>
> And get:
>
> gmake[2]: Entering directory `/home/pablo/mono/mono/runtime'
> d=`cd ../support && pwd`; \
>         sed 
> 's,target="libMonoPosixHelper[^"]*",target="'$d/libMonoPosixHelper.la'",' 
> ../data/config > etc/mono/configt
> if test -z ""; then :; else \
>           sed 's,<configuration>,& <dllmap dll="gdiplus.dll" target="" 
> />,' etc/mono/configt > etc/mono/configtt; \
>           mv -f etc/mono/configtt etc/mono/configt; fi
> mv -f etc/mono/configt etc/mono/config
> /bin/bash /home/pablo/mono/mono/install-sh -d _tmpinst/bin
> cp mono-wrapper _tmpinst/bin/mono
> echo '#! /bin/sh' > _tmpinst/bin/mcs ; \
>         r=`pwd`; m=`cd ../../mcs && pwd`; \
>         echo 'exec "'"$r/_tmpinst/bin/mono"'" 
> "'"$m/class/lib/default/mcs.exe"'" "$@"' >> _tmpinst/bin/mcs ; \
>         chmod +x _tmpinst/bin/mcs
> echo '#! /bin/sh' > _tmpinst/bin/ilasm ; \
>         r=`pwd`; m=`cd ../../mcs && pwd`; \
>         echo 'exec "'"$r/_tmpinst/bin/mono"'" "'"$m/ilasm/ilasm.exe"'" 
> "$@"' >> _tmpinst/bin/ilasm ; \
>         chmod +x _tmpinst/bin/ilasm
> echo '#! /bin/sh' > _tmpinst/bin/gmcs ; \
>         r=`pwd`; m=`cd ../../mcs && pwd`; \
>         echo 'exec "'"$r/_tmpinst/bin/mono"'" 
> "'"$m/class/lib/net_2_0/gmcs.exe"'" "$@"' >> _tmpinst/bin/gmcs ; \
>         chmod +x _tmpinst/bin/gmcs
> if test -w ../../mcs; then :; else chmod -R +w ../../mcs; fi
> cd ../../mcs && gmake NO_DIR_CHECK=1 PROFILES='default net_2_0 net_3_5 
> net_2_1' CC='gcc' all-profiles
> gmake[3]: Entering directory `/home/pablo/mono/mcs'
> gmake profile-do--default--all profile-do--net_2_0--all 
> profile-do--net_3_5--all profile-do--net_2_1--all
> gmake[4]: Entering directory `/home/pablo/mono/mcs'
> gmake PROFILE=basic all
> gmake[5]: Entering directory `/home/pablo/mono/mcs'
> gmake[6]: mcs: Command not found
> gmake[6]: *** [build/deps/basic-profile-check.exe] Error 127
> gmake[6]: Entering directory `/home/pablo/mono/mcs'
> *** The compiler 'mcs' doesn't appear to be usable.
> *** Trying the 'monolite' directory.
> gmake[7]: Entering directory `/home/pablo/mono/mcs'
> GC Warning: Large stack limit(133464064): only scanning 8 MB
> gmake[8]: *** [build/deps/basic-profile-check.exe] Error 1
> gmake[8]: Entering directory `/home/pablo/mono/mcs'
> *** The contents of your 'monolite' directory may be out-of-date
> *** You may want to try 'make get-monolite-latest'
> gmake[8]: *** [do-profile-check-monolite] Error 1
> gmake[8]: Leaving directory `/home/pablo/mono/mcs'
> gmake[7]: *** [do-profile-check] Error 2
> gmake[7]: Leaving directory `/home/pablo/mono/mcs'
> gmake[6]: *** [do-profile-check-monolite] Error 2
> gmake[6]: Leaving directory `/home/pablo/mono/mcs'
> gmake[5]: *** [do-profile-check] Error 2
> gmake[5]: Leaving directory `/home/pablo/mono/mcs'
> gmake[4]: *** [profile-do--basic--all] Error 2
> gmake[4]: Leaving directory `/home/pablo/mono/mcs'
> gmake[3]: *** [profiles-do--all] Error 2
> gmake[3]: Leaving directory `/home/pablo/mono/mcs'
> gmake[2]: *** [all-local] Error 2
> gmake[2]: Leaving directory `/home/pablo/mono/mono/runtime'
> gmake[1]: *** [all-recursive] Error 1
> gmake[1]: Leaving directory `/home/pablo/mono/mono'
> gmake: *** [all] Error 2
>
>
>
> Andreas Färber escribió:
>   
>> Hi Cetin!
>>
>> Am 03.10.2008 um 23:01 schrieb Cetin Sert:
>>
>>   
>>     
>>> I'm also trying to build mono on opensolaris 10 x86-64 and got this  
>>> message:
>>>
>>> when I run ./configure --with-gc=boehm
>>> checking gc.h usability... no
>>> checking gc.h presence... no
>>> checking for gc.h... no
>>>
>>> checking gc/gc.h usability... no
>>> checking gc/gc.h presence... no
>>> checking for gc/gc.h... no
>>> checking for GC_malloc in -lgc... no
>>> configure: error: "GC requested but libgc not found! Install libgc  
>>> or run
>>>
>>> configure with --with-gc=none."
>>> I had built and installed the latest boehm gc I could find. I think  
>>> it was version 7.sth.
>>>     
>>>       
>> Did you add appropriate CPPFLAGS and LDFLAGS arguments for configure,  
>> to tell it about your installation location?
>>
>>
>>   
>>     
>>> And if I configure mono using --with--gc=none how can I add a gc  
>>> later? o_O??
>>>     
>>>       
>> Well, the --with-gc=none workflow would be compiling without first,  
>> then reconfiguring and recompiling with some other --with-gc= option  
>> later on.
>>
>> On x86-64 OpenSolaris, you can use --with-gc=boehm right away, worked  
>> nicely with Boehm GC 7.1 for me. If there is a compilation problem in  
>> Boehm GC, you may need to install a more recent build (some in the low  
>> 90 range was broken).
>>
>> Best regards,
>>
>> Andreas
>>
>> _______________________________________________
>> Mono-devel-list mailing list
>> Mono-devel-list at lists.ximian.com
>> http://lists.ximian.com/mailman/listinfo/mono-devel-list
>>
>>   
>>     
> _______________________________________________
> Mono-devel-list mailing list
> Mono-devel-list at lists.ximian.com
> http://lists.ximian.com/mailman/listinfo/mono-devel-list
>
>